vpt_switches
viewpoint switches
================================================================================
S1 1-3 baud rate
000 110
001 150
010 300
011 1200
100 2400
101 4800
110 9600
111 19200
4 auto-scroll
0 disabled
1 enabled
5 auto-linefeed
0 disabled
1 enabled
6 line mode
0 half duplex
1 full duplex
7-8 parity
00 odd
01 even
10 mark
11 space
================================================================================
S2 1 char display
0 light
1 dark
2 display parity
0 disabled
1 enabled
3 screen refresh
0 60 Hz
1 50 Hz
4-6 International character sets
000 Domestic U S
001 Belgium, France
010 Germany, Switzerland
011 Sweden, Finland
100 Denmark, Norway
101 Spain
110 United Kingdom, Netherlands
111 Reserved
7 cursor display
0 steady
1 blinking
8 cursor format
0 block
1 underline
================================================================================
JP1 jumper key click [ enables key click ]
================================================================================
vpt-1a switches
Rear Panel Switch Settings
--------------------------
Switch Name Setting Function
--------------------------------------------------------
1,2,3 Baud Rate 000 110
001 300
010 1200
011 1800
100 2400
101 4800
110 9600
111 19,200
4 Auto Scroll 0 Disabled
1 Enabled
5 Auto Line Feed 0 Disabled
1 Enabled
6 Line Mode 0 Half Duplex
1 Full Duplex
7,8 Parity 00 Odd
01 Even
10 Marking
11 Spacing
0 = Up, 1 = Down
Switches are only polled at power-up, so if any settings are changed with the
terminal ON, it must be powered-up again for functions to be altered.
---
vpt-2 switches
---
vpt-3a+ switches
REAR PANEL SWITCH SETTINGS
Switch # Name Setting Function
S1-1,2,3 Data Rate 000 110
(bps) 001 300
010 1200
011 1800
100 2400
101 4800
110 9600
111 19200
S1-4 Auto Scroll 0 Disabled
1 Enabled
S1-5 Auto Line Feed 0 Disabled
1 Enabled
S1-6 Line Mode 0 Half Duplex
1 Full Duplex
S1-7,8 Parity 00 Odd
01 Even
10 Marking
11 Spacing
INTERNAL SWITCH SETTINGS
S2-1 Character 0 Light on dark
Display 1 Dark on light
S2-2 Parity Error 0 Disabled
1 Enabled
S2-3 Screen Refresh 0 60 Hz
1 50 Hz
S2-4 Mode 0 3A Mode
1 3A Plus Mode
S2-5 Clear Screen 0 Enabled
(CTRL-Z) 1 Disabled
S2-6 Space/Adv 0 Disabled
1 Enabled (not used in 3A+ mode)
S2-7 Cursor 0 Steady
1 Blinking
S2-8 Cursor 0 Block
1 Underline
COMMANDS ASCII CODE
Address, Absolute ESC,=,row,column
Beep BEL
Aux Port Enable ESC,@
Aux Port Disable ESC,A
Backspace BS
Cursor back BS
Cursor down LF
Cursor forward FF
Cursor home RS
Cursor up VT
Cursor supress ETB
Cursor enable CAN
Erase to end of line ESC,T
Erase to end of page ESC,Y
Erase screen SUB
Keyboard lock SI
Keyboard unlock SO
Read current cursor position ESC,?
Set Attribute ESC,0,x (see below for values of x)
Tag bit reset ESC,(
Tag bit set ESC,)
Transparent Print on ESC,3
Transparent Print off ESC,4
ATTRIBUTES
Normal @
Half Intensity A
Blinking B
Half Intensity Blinking C
Reverse Video P
Reverse Video Half Intensity Q
Reverse Video Blinking R
Reverse Video Half Intensity
Blinking S
Underlined `
Underlined Half Intensity a
Underlined Blinking b
Underlined Half Intensity
Blinking c
Video suppress D
Jay's termcap for the thing:
p0|plus|Adds Viewpoint 3a+:\
:am:bw:bs:pt:co#80:li#24:\
:cd=80\EY:ce=\ET:cl=80\E*:cm=\E=%+ %+ :\
:up=^K:ho=^^:kb=\b:nd=\f:so=\E0Q\E):se=\E(:\
:kd=^J:kh=^^:kl=\b:kr=^L:ku=^K: