How to Install

You will need:

* DOS Box
* An Empty Flash Drive
* 4 Unzipped Sequencer Folders

1.) Plug in the flash drive.
	Note the drive letter assigned to the flash drive.
	If you're not sure where to find this, open My Computer.
	Look for something like, "Removable Disk (E:).
	In this case, E is the drive letter
	
2.) Copy the contents of the "Sequencer - Installer" folder onto the flash drive.

3.) Boot up DOS Box and mount the folder you want to install to.
	This is usually done by typing "mount C C:\Games".

4.) Mount the flash drive as a floppy disk device.
	This is done by typing "mount B E:\ /t floppy", where E is the driver letter to your flash drive.

5.) Change directory to the newly mounted floppy drive.
	Type "E:".

6.) You should now see the contents the first disk on the drive.
	Type "dir". You should see the file "VINSTALL.EXE" among others.

7.) Launch the installer.
	Type "VINSTALL.EXE". This will begin installing Voyetra Sequencer Plus Gold.
	Answer the various setup questions about which device you plan on using.
	Eventually you'll be asked to enter a new disk.

8.) In Windows, delete everything on you flash drive. Then copy the files inside the folder that is asked for to the flash drive.

9.) Reset the mount by pressing CTRL+F4.

10.) Press ENTER and continue installing.
	If the message doesn't go away check to make sure you've copied the right disk onto your flash drive and hit CTRL+F4.

11.) Continue this process until the install completes.