readme

Important information regarding xd and pro versions:

    files ending with "_pro" - these effects are designed to work with the prologue, and have a slightly 'thicker' algorithm. they can be used on the minilogue-xd and the NTS1, however do note that if you enable all 3 effects at once, dropouts due to FX CPU overload may occur. If you however just use the modulation and the reverb, you will likely be OK.
    files ending with "_xd_ - these effects are designed for the minilogue-xd and the NTS1, where you can use all 3 effects at the same time. Note, the algorithm has been trimmed down a little, so you may notice a slight difference in the sound.

    for minilogue-xd and NTS-1 users, you can use any of the .prlgunit files, currently the librarian accepts these as they are. See above for caveats regarding running the _pro versions of the effects on your minilouge-xd or NTS1.
    for prologue users, while you can install and run either the _pro or the _xd versions, do note that the _pro versions are the effects 'as intended' - and are slightly more complex and can sound a bit 'thicker' than the _xd versions.

for details see http://hammondeggsmusic.ca/logueplugins/cathedral.html